Sweep The Moon Belts & Conveyors
Wire Robot Dust Out → Belt → Base Belt In so docks earn while you sweep—plus when to wait and how splitters fit.
YouTube comments under Sweep The Moon guides ask the same question every week: how do belts work? This page answers it for DomBlox Place 109576450376407. Belts move dust containers from robots and machines toward the base intake so automation pays without hand-carrying every kilogram. Learn the one correct port order, when belts are worth cash, how splitters fit, and what breaks after Hive Mites or Ranger Drone drops.
Read Controls for Build Mode (2) and building menu (B), then Robots & Automation for dock types. Belts are useless before you own a dock you can afford to run.
What belts do
Sweep The Moon belts carry packed dust toward Base Belt In. Their value rises when robots or drone stations produce more dust than you want to haul by foot. While you still clear near-base tiles with a small canister, spend cash on brushes and Upgrade Computer levels first—a lonely conveyor on an empty moon is decoration.
Belts do not:
- Replace the personal canister deposit pad for hand sweeping (unless a pass changes sell feel).
- Auto-build your Robot Dock.
- Fix a dock placed on dirty ground.
They do:
- Connect Robot Dust Out (and similar machine outs) to the base intake path.
- Let splitters / mergers fan multiple docks into one trunk line.
- Keep Hive Mites / Mite Hive and Ranger Drone Station output flowing during Updates content windows.
The only wiring order that matters
Community guides and player tests agree on this spine:
Robot Dust Out → Belt → Base Belt In
- Place a Robot Dock (or Large Robot Dock / Mite Hive / Ranger Drone Station) on cleaned tile after Build Mode 2 → menu B.
- Find the dock’s Dust Out port.
- Place belt segments from that out toward the base.
- Terminate at Base Belt In (the intake tied to your sell / processing path).
- Confirm dust packets move. If nothing moves, reverse the mistaken segment—do not spam extra docks.
Reversing In/Out is the #1 reason robots “do nothing.” Leave the manual DEPOSIT pad unobstructed so hand dumps still work while you debug.
When to build your first belt
Build the first short belt only after:
- Dustpan-class brush (or better) from the Brushes Guide.
- A canister that survives a real route (Upgrades).
- At least one fully cleaned tile for legal dock placement.
- Enough cash for a basic Robot Dock—not the most expensive station on day one.
Then place one dock, one belt path, and watch a full sell cycle. Only after that packet reaches base should you add length, splitters, or a second dock. The Tools Hub early checklist follows the same rule.
Splitters, mergers, and longer runs
As you expand:
- Straight trunk first. Fancy junctions before a working trunk waste cash.
- Splitters / mergers combine multiple Dust Outs into one Base Belt In when two docks share a moon.
- Grid-friendly placement beats free-decor builds for anything that must move dust—align segments so packets do not stall on corners.
- Power / solar pieces mentioned in automation guides matter when docks stop under load; belts alone cannot power machines.
Co-op tip: appoint one “factory tech” who may edit belts. Four friends rotating pieces creates spaghetti that blocks bays and the deposit pad (co-op guide).
Passes that change belt planning
- +1 Robot Dock (149 Robux) — free small dock each moon; robots clean for the crew; relocatable; works on friends’ moons. More docks = more belt fan-in.
- Sell As You Sweep / Infinite Canister — change hand-loop pressure but do not remove the need for Dust Out → Belt In on robot lines.
- Head Start / Fast Vehicles — mobility passes; still leave belt trunks intact so flying or driving does not starve the factory.
Rank spends on the gamepasses tier list. No confirmed codes existed mid-November 2026 to fund belts for free.
Event machines and belts
November 2026 content added more Dust Out style machines:
- Hive Mites / Mite Hive (about Nov 6–11) — treat as a build-menu robot/hive entry; same Out → Belt → In habit (Hive Mites).
- Ranger Drone Station (about Nov 11–13 Update 2) — drone fantasy still needs intake wiring (Ranger Drone).
- Flyable UFO (about Nov 14–18) — flying collection feeds the canister/pass economy; keep belts alive for dock income while pilots roam (Flyable UFO).
After each patch, rejoin and re-check port labels. DomBlox renames build entries more often than it rewrites the belt rule.
Troubleshooting
| Problem | Likely cause | Fix |
|---|---|---|
| Robots idle | Belt reversed or missing | Rewire Dust Out → Base Belt In |
| Cannot place dock | Tile not clean | Finish tile to 100% first |
| Packets stall | Broken corner / gap | Rebuild segment; simplify junction |
| Deposit blocked | Belt clutter on pad | Clear path to blue DEPOSIT |
| Build menu missing | Wrong mode | Press 2 then B |
| “Belt key?” confusion | No single magic key | Placement is Build Mode, not a hidden hotkey |
Players asking “what key places dust on the belt?” usually need the dock’s automatic Dust Out, not a manual package hotkey. Hand dust still goes to the deposit pad unless a pass pays as you sweep.
Belt checklist
- Finish a tile; enter Build Mode 2 → B.
- Place affordable Robot Dock on clean ground.
- Belt Dust Out → Base Belt In with no gaps.
- Watch one full automated delivery before expanding.
- Add splitter only when a second dock is online.
- Protect deposit pad and vehicle bays from belt clutter.
- Re-test after Hive Mites / Ranger Drone / UFO patches.
Related guides
- Robots & Automation — docks, Hive Mites, drone station, solar.
- Controls — Build Mode keys and mouse unlock.
- Upgrades — what to buy before conveyor spam.
- Earn Cash Fast — how belt income fits the cash loop.
- 100% Clean — keep finishing tiles while factories run.
Get the first short belt right and Sweep The Moon’s mid-game finally feels like a factory—not a toothbrush commute.
Frequently Asked Questions
Quick answers to the most common Sweep The Moon questions.
How do I connect belts in Sweep The Moon?
Place a Robot Dock on cleaned ground, then wire Robot Dust Out through belt segments into Base Belt In. Do not reverse the ports.
What key puts dust on the belt?
Docks output through Dust Out automatically once belted. Hand-swept dust still uses the base DEPOSIT pad unless a sell-as-you-sweep pass changes that loop.
When should I build belts?
After Dustpan-class brush, a workable canister, one cleaned tile, and your first Robot Dock. Do not buy long conveyors during the toothbrush hour.
Why are my robots idle?
Usually the belt is missing, gapped, or running the wrong direction. Rebuild Dust Out → Base Belt In and keep the deposit pad clear.
Do Hive Mites and Ranger Drone use belts?
Yes. Treat their Dust Out style ports like other machines: belt into Base Belt In. Recheck labels after each DomBlox update.